Address: Chuang Xiong Industrial Park, min Zhi Avenue, Longhua District, Shenzhen.
Seat machine: 0755-23058522
Mobile phone: 135-1045-8498
Web site: www.unilumingroup.com
Mailbox: iven@chuangxionggroup.com
![]() |
|
What are the five points for attention in wiring layout of house decoration?
The five major matters of attention to the layout of the electrical wiring of the house. The layout of the wire is a necessary project in every family decoration project. It is also one of the hidden works. As the name suggests, it will be covered by other projects after the layout of the wires, and then become invisible engineering. In addition to beauty, it brings some trouble, because it can't be seen directly from the surface, so it is more troublesome if you make a mistake to remedy it when compared to other projects. How to do the layout of the house decoration wire to ensure the safety of our electricity? Next and a small editor to look at the five points of attention to the layout of the house decoration wire.
Five important matters of attention to the layout of the electric wire for the house decoration
1. A comprehensive understanding of the capacity of household appliances
Before wiring, we should first consider the amount of wires and the specifications of electrical wiring according to the total amount of household appliances and subsequent purchase of household appliances. Such as refrigerators, ovens, air conditioners and other high-power appliances need a separate line. Household appliances need to be constantly updated and updated, and power will also continue to strengthen. When wiring, not only to consider the existing capacity, but also to consider the future of electricity, and high power electrical appliances alone wiring for future line inspection and maintenance is good.
Two. Strong electricity to the wall between kitchen and toilet
Toilets and kitchens usually cannot lay strong wires on the ground, but rather walk along the walls along the roof. Because the function of kitchen and toilet is strong, the ground waterproofing is very strict. The way of slotting on the ground will affect the waterproof function of the whole room. Besides, kitchen and bathroom is a wet place. Once the ground is seeping, strong wires will cause potential safety hazard. Besides, functional rooms such as washrooms and kitchens will make very strict tile waterproofing, so it will be very troublesome to repair wires in the future.
Three. The line is vertical to horizontal vertical
The horizontal and vertical wiring trend has already formed the wiring construction standard, but there are many early construction workers drawing the line and saving the diagonal line. Slant laying seems to save money and save money, but as a hidden project, wiring engineering is not convenient to overhaul. Many netizens like to add some murals in their own homes. This needs to be stud in the wall. The horizontal and vertical standard wiring will let the owner understand the location of the hole. Without the cable-stayed wiring, it is easy to chisel the line.
Four. Wire to be insulated pipe
Buried lines can not be directly embedded in plastering layer, but in insulated pipes of electric wires. The wires in the casing can not have a twist or joint. Under normal circumstances, a group of wires are not allowed to exceed three turns when they are buried, and more than three turns must be connected. In order to fear the effect of beauty and to save things, a group of wires turn around the head in a group of wire laying, and the short time will not affect the use, but one of the wires will be out of question in the future, and a group of wires will not be used.
Five the total cross section of wires should be standard
The total section of a set of wires made of insulating sleeves can not exceed 40% of the diameter of the casing according to the regulations, that is to say, 60% of the activity space should be reserved. When the wire is working, it will produce a lot of heat. If the wire space in the casing is not enough and overcrowded, it will reduce the heat dissipation space of the wire, reduce the service life, and it is not convenient for the maintenance and pumping of the wire.